 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HES SERIES 150 WATT Powering Communications and Technology DESCRIPTION HES single output DC/DC converters provide up to 150 Watts of output power in an industry standard, half-brick package and footprint. These units feature ultra-high efficiency, Class A conducted noise specs, and fixed switching frequency. The HES is designed with open-frame packaging, along with planar magnetics to provide maximum useable power with minimal thermal constraints. The HES is especially suited to harsh telecom, networking, and industrial applications, and is fully compatible with production board washing processes. TECHNICAL SPECIFICATIONS Input Voltage Range 24 VDC Nominal 48 VDC Nominal Reflected Ripple Input Reverse Voltage Protection Input Undervoltage Lockout / Hysteresis 18 - 36 VDC 36 - 72 VDC 50 mA Shunt Diode <34V/1V Nom. FEATURES * High Efficiency * Industry Standard HalfBrick * Open-Frame Packaging * 100C Baseplate Operation * * * * Water Washable "True-Trim" Option 1500V Isolation Positive or Negative Logic Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Remote Sense Headroom Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Voltage Trim Range Short Circuit / Overcurrent Protection Current Limit Threshold Range, % of Iout Rated OVP Trip Range OVP Type 1% 0.2% Vout 0.2% Vout 0.5 VDC 10 % 25% Iout 4% Vout 500 ms 10% Shutdown / Hiccup 110 - 130% 120 - 140% Vout Nom. Self Recovering Efficiency vs. Load (48V Input) 95 90 85 EFFICIENCY % 80 75 HES033ZE 70 65 60 55 HES075ZG HES100ZE High Density - Board Mounted Power Division 50 1 2 3 4 5 6 7 8 9 10 X10 = LOAD % General Turn-On Time Remote Shutdown Remote Shutdown Reference Switching Frequency 2.5 & 3.3, 5V Model Isolation Input - Output Input - Case Output - Case Temperature Coefficient Case Temperature Operating Range Storage Range Thermal Shutdown Range Vibration, 3 Axes, 5 Min Each MTBF (Bellcore Tr-nwt-000332) Safety Weight (Approx.) 10 ms Positive Or Negative Logic Vin Negative 200 kHz, 300 kHz (Respectively) 1500 VDC 1050 VDC 500 VDC 0.02%/C -40 To +100C -40 To +125C 105 To 115C 5 g, 10 - 55 Hz 1.8 X 106 hrs UL 1950, Csa 22.2-950, En60950 1.4 oz Notes MTBF predictions may vary slightly from model to model. Specifications typically at 25C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. 1 HES SERIES 150 WATT Powering Communications and Technology MODELS - (See the last page of Section for options.) Vin (Volts) 24 24 48 48 48 48 48 48 48 48 48 48 48 48 Vin Range (Volts) 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 Iin Max.* (Amps) 5.5 7.4 1.13 1.62 1.33 1.69 2.42 1.77 2.26 3.23 2.60 3.33 4.72 2.20 Vout (Volts) 2.5 3.3 3.3 5 2.5 3.3 5 2.5 3.3 5 2.5 3.3 5 2.1 Iout Rated (Amps) 30 30 10 10 15 15 15 20 20 20 30 30 30 30 Ripple & Noise Pk-Pk (mV) 150 100 100 100 100 100 100 100 100 100 100 100 100 100 Efficiency Typ. ** 81% 83% 87% 88% 86% 88% 89% 86% 85% 88% 82% 83% 86% 80% Model HES075YD-A HES100YE-AT HES033ZE-A HES050ZG-A HES037ZD-A HES050ZE-A HES075ZG-A HES050ZD-A HES066ZE-A HES100ZG-A HES075ZD-A HES100ZE-A HES150ZG-A HES063ZC-A * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. MECHANICAL DRAWING 2.28" (57.9mm) MOUNTING INSERTS M3X.5 THROUGH 4PL 0.18" (4.6mm) 1 5 1.400"(35.6mm) 2 2.40" (61.0mm) 3 6 1.000"(25.4mm) DIA 0.080" (2.0mm) 2PL BOTTOM VIEW 7 0.700"(17.8mm) 8 0.400"(10.2mm) DIA 0.040" 4 9 0 (1.0mm) 7PL High Density - Board Mounted Power Division -0.50"(-12.7mm) 1.900" (48.3mm) 0.025" REF. 0 -0.19" (-4.8mm) (0.6mm) 0.50" (12.7mm) Thermal Impedance Natural Convection 100 LFM 200 LFM 300 LFM 400 LFM 15.4 C/W 12.2 C/W 9.3 C/W 7.4 C/W 6.4 C/W Pin 1 2 3 4 5 6 7 8 9 Function -Vin Case On/Off +Vin -Vout -Sense Trim +Sense +Vout Tolerances Inches: .XX 0.020 .XXX 0.010 Pin: 0.002 (Millimeters) .X 0.5 .XX 0.25 0.05 Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. (Dimensions as listed unless otherwise specified.) 2 OPTIONS Powering Communications and Technology When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTIONS Negative Logic Lucent Compatible Trim Terminal Strip Trim Enable Trim and Enable Current Share Headerless PIN LENGTH AND HEATSINK OPTIONS 0.110" (2.8mm) Pin Length 0.150" (3.8mm) Pin Length 0.24" (6.1mm) Horizontal Heatsink 0.24" (6.1mm) Vertical Heatsink 0.45" (11.4mm) Horizontal Heatsink 0.45" (11.4mm) Vertical Heatsink 0.95" (24.1mm) Horizontal Heatsink 0.95" (24.1mm) Vertical Heatsink 8 9 1H 1V 2H 2V 3H 3V All Units (Except SMS) All Units (Except SMS) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) SUFFIX N T TS 1 2 3 4 Y APPLICABLE SERIES HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD HAS, HBD, HBS, HES, QBS, QES XWS, XWD, XWT IAS, LES IAD, IAS, LES, SMS IAS, LES SMS Encapsulated EWS, IWS, OWS Standard Pin Length is 0.180" (4.6mm) REMARKS TTL "Low" Turns Module ON TTL "High" Turns Module OFF Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Example Options: HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95" vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110" pin length. NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 3 |
Price & Availability of HES150ZG-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |